Floor | Wall

Turco Classico

Part of: Natural Stone Natural Stone Travertine

Travertine

Travertine embodies the classic stone aesthetic found in ancient Roman monuments and temples, leaving a lasting impression for any space.

Go To Usage Chart>

Want to see this product in person? Where to buy

Roll over image to zoom

Additional Colors

Turco Classico Square

Color Code: T324

Thickness: 1/2, 3/8

Size: 12X12, 18X18

Finish: Honed

Shade Variation: H: High

Country of Origin: Turkey

Turco Classico Pattern

Color Code: T324

Thickness: 1/2

Size: Versaille

Finish: Brushed

Shade Variation: H: High

Country of Origin: Turkey

Usage Chart


Grout Joint Recommendation	1/16", 1/16" to 1/8"
Durability	2 Medium/Light Commercial: Suitable for light commercial and residential use.
Soundness	Group C: These stones may contain holes, voids, lines of separation and structural flaws. It is standard practice to repair these stones by filling them or reinforcing them.
Exterior Usage	E Suitable for uncovered exterior floor and wall applications in non freezing climates only
Country of Manufacturer	Turkey
Country of Origin	Turkey
Durability Notes:Polished surfaces are not recommended for floor areas where slip resistance is a concern. Our durability recommendations are only based on the technical characteristics of the stones, however, slip resistance shall still be taken into consideration when selecting the product for a specific application. Natural stone products do not meet minimum coefficient of friction thresholds recommended by safety standard setting organizations.
Soundness Notes:Soundness is meant to help classify denser stones (Group A and B) from more fragile stones (Group C and D). Stones classified under Groups C and D may require additional fabrication before, during or after installation as part of regular maintenance.
Exterior Usage Notes:*Covered implies an area protected from the elements. Natural stone products are not recommended for any wet areas where they may be exposed to chemicals, such as waterlines and pools, or to extreme humidity and heat, such as steam rooms, among others.
Special Notes:A medium bed mortar is required for tiles with at least one side greater than 15".\|A sealer is recommended. (Note: Some stones, such as limestone and tumbled stone among others, should be sealed prior to grouting.)\|Can be used in interior wet wall areas, if sealed and maintained properly. If not properly maintained, the stone look could be altered. Please contact your sealer manufacturer or your Daltile sales representative for information about products that can protect the stone from moisture exposure.\|Might contain dry seams, pits, fossils and glass veins that are filled at the factory or during installation. These are all inherent characteristics of the stone. Since these voids can sometimes lose their fillings, they should be refilled as part of normal maintenance.\|Not recommended for shower floors.\|The slip resistance of natural stone tiles vary. Caution should be used in determining if the selected stone will be sufficiently slip resistant for exterior use.\|White setting materials are recommended.