Marble has been used to create some of architecture and design's most impressive structures. This collective of earthy and neutral colors will add luxury and sophistication to any design.
Roll over image to zoom
-
Additional Colors
:
M106
:
1/2, 3/8
:
12X12, 18X18
:
Polished
:
M: Medium
:
United Kingdom
:
M106
:
3/8
:
Wave
:
Polished
:
M: Medium
:
China
-
Usage Chart
Grout Joint Recommendation 1/16", 1/8" Durability 3 Heavy Commercial: Suitable for most commercial and/or high traffic areas. Soundness Group B: Similar to Group A but geological imperfections could be evident. These stones may contain holes or voids which are filled with epoxy or resin. Exterior Usage SF Suitable for covered* exterior floors in non-freezing climates only.|SW Suitable for covered* exterior walls in non-freezing climates only. Country of Manufacturer Turkey Country of Origin Turkey Polished surfaces are not recommended for floor areas where slip resistance is a concern. Our durability recommendations are only based on the technical characteristics of the stones, however, slip resistance shall still be taken into consideration when selecting the product for a specific application. Natural stone products do not meet minimum coefficient of friction thresholds recommended by safety standard setting organizations. Soundness is meant to help classify denser stones (Group A and B) from more fragile stones (Group C and D). Stones classified under Groups C and D may require additional fabrication before, during or after installation as part of regular maintenance. *Covered implies an area protected from the elements. Natural stone products are not recommended for any wet areas where they may be exposed to chemicals, such as waterlines and pools, or to extreme humidity and heat, such as steam rooms, among others. A medium bed mortar is required for tiles with at least one side greater than 15".|A sealer is recommended. (Note: Some stones, such as limestone and tumbled stone among others, should be sealed prior to grouting.)|Can be used in interior wet wall areas, if sealed and maintained properly. If not properly maintained, the stone look could be altered. Please contact your sealer manufacturer or your Daltile sales representative for information about products that can protect the stone from moisture exposure.|Might contain dry seams, pits, fossils and glass veins that are filled at the factory or during installation. These are all inherent characteristics of the stone. Since these voids can sometimes lose their fillings, they should be refilled as part of normal maintenance.|Not recommended for shower floors.|The slip resistance of natural stone tiles vary. Caution should be used in determining if the selected stone will be sufficiently slip resistant for exterior use.|White setting materials are recommended.
You May Also Like
