Keystones
Architect Gray Oval Straight Joint 2X1 Matte
A deep warm tan with subtle mottling gives Architect Gray real weight in a 2x1 matte ColorBody porcelain oval mosaic.
Still Deciding?
Special Features
For a full list of colors, visit https://www.daltile.com/products/mosaic/keystones/architect-gray-oval-straight-joint-2x1-matte
COORDINATING TRIMS
Bullnose
Size : 2X2
Shape: S886
Bullnose Corner
Size : 2X2
Shape: SC886
Cove Base
Size : 2X2
Shape: C833
Cove Base Outcorner
Size : 2X1
Shape: SCL833
Cove BC
Size : 1X1
Shape: CK813
Universal Trim
Size : 1X1
Shape: S812
Universal Trim
Size : 2X2
Shape: SC813
For a full list of coordinating trim options, visit https://www.daltile.com/products/mosaic/keystones/architect-gray-oval-straight-joint-2x1-matte
Overview
Despite its name, Architect Gray leans warm and dark rather than neutral, closer to a grounded taupe than a true gray. The 2x1 oval shape, set on a 12"x22" sheet in matte ColorBody porcelain, holds that depth consistently from piece to piece, since the color is solid through the body rather than applied as a glaze. Available suitability for wet floor, shower, and submerged applications makes it a workable choice beyond dry interior rooms.
Design Note
This is the color to reach for when a space calls for contrast rather than a blend. Its saturation and depth give a room an anchor rather than a backdrop.
-
Product Details
Collection Name Keystones Color Code D109 Color Name Architect Gray Color Family Gray Nominal Size 2X1 Actual Size 12.000 X 22.000 Nominal Thickness 1/4 Nominal Mounted Sheet Size 12x22 Mount Method Dot Mount Size Category Small Country of Origin United States Finish Matte Body Type Unglazed Mosaic Edge Non Rectified Mosaic Pattern Oval Straight Joint Shade Variation V1 LOW VARIATION Pre-Consumer Recycled 12.0 Post-Consumer Recycled 0
-
Application
Target Dcof Wet Suitable Dry & Level - Interior Floor N/A ✔ Wet & Level - Interior Floor ≥0.42 ✔ Shower Floors (Residential or Light Commercial) ≥0.42 ✔ Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) ≥0.60 ✔ Ramps & Inclines ≥0.65 Walls/Backsplashes N/A ✔ Countertops N/A ✔ Pool Linings N/A ✔ 1/8" ● Manufacturer Advisory: All tile is measured by the DCOF AcuTestTM method. Tiles with DCOF values less than 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.
No additional notes
-
Specifications
Performance Chart Test Method Result Water Absorption ASTM C373 < 0.5 Breaking Strength ASTM C648 > or equal to 250 lbf Scratch Hardness ASTM MOHS 8 Chemical Resistance ASTM C650 Resistant
-
Download Tear Sheet
Architect Gray Oval Straight Joint 2X1 Matte
View PDF
-
Special Features
Special FeaturesMade in the USA

