Elegant marble and limestone mosaics in raindrop, pebble, triangle, arabesque, oval, hex, and many more shapes, make these an excellent choice for the distinguished design. Classic color and texture make these a feast for the senses.
Roll over image to zoom
-
Additional Colors
:
DA17
:
5/16
:
Chevron
:
Honed
:
R: Random
:
China
-
Usage Chart
Grout Joint Recommendation 1/8" Durability 2 Medium/Light Commercial: Suitable for light commercial and residential use. Soundness Group B: Similar to Group A but geological imperfections could be evident. These stones may contain holes or voids which are filled with epoxy or resin. Exterior Usage NA Not recommended for exterior applications. Country of Manufacturer China Country of Origin Turkey Polished surfaces are not recommended for floor areas where slip resistance is a concern. Our durability recommendations are only based on the technical characteristics of the stones, however, slip resistance shall still be taken into consideration when selecting the product for a specific application. Natural stone products do not meet minimum coefficient of friction thresholds recommended by safety standard setting organizations. Soundness is meant to help classify denser stones (Group A and B) from more fragile stones (Group C and D). Stones classified under Groups C and D may require additional fabrication before, during or after installation as part of regular maintenance. A sealer is recommended. (Note: Some stones, such as limestone and tumbled stone among others, should be sealed prior to grouting.)|Install with a non-staining epoxy. Do not use any water based setting materials with these stones.|Might contain dry seams, pits, fossils and glass veins that are filled at the factory or during installation. These are all inherent characteristics of the stone. Since these voids can sometimes lose their fillings, they should be refilled as part of normal maintenance.|Not recommended for shower floors.|Not recommended in wet areas.|These stones contain deposits of minerals and iron that may react to moisture. Stone bleeding or rusting is a common example of this. These stones should not be used in installations where they would be exposed to standing, run off water or too much humidity. A sealer is strongly recommended but will not prevent the chemical reaction from happening|White setting materials are recommended.
You May Also Like
