Transform your surroundings into a haven of tranquility with ColorBody™ and Glazed porcelain tile, Indoterra. A concrete-look canvas of neutral tones, Indoterra centers a minimalistic design with large formats, dimensional surfaces and StepWise™ technology for an immersive experience indoors and outdoors.
Additional Colors
Available Shapes and Sizes
Application
| Target Dcof Wet | Suitable | |
|---|---|---|
| Dry & Level - Interior Floor | N/A | ✔ |
| Wet & Level - Interior Floor | ≥0.42 | ✔ |
| Shower Floors (Residential or Light Commercial) | ≥0.42 | ✔ |
| Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) | ≥0.60 | ✔ |
| Ramps & Inclines | ≥0.65 | |
| Walls/Backsplashes | N/A | ✔ |
| Countertops | N/A | ✔ |
| Pool Linings | N/A | ✔ |
| 1/8" | ||
|
● Manufacturer Advisory: All tile is measured by the DCOF AcuTestTM method. Tiles with DCOF values less than 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com. ● A DCOF value of greater than or equal to 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. For more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF. |
||
|
● Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed. ● Only 2x9 suitable for Pool Linings. |
||
Technical Specifications
| Test Method | Floor Tile | Mosaic Tile | |
|---|---|---|---|
| Water Absorption | ASTM C373 | < 0.5 | < 0.5 |
| Breaking Strength | ASTM C648 | > 275 lbs | > 275 lbs |
| Scratch Hardness | ASTM MOHS | 8 | 8 |
| Chemical Resistance | ASTM C650 | Resistant | Resistant |
Durability Chart
| Floor Surface Wear Resistance |
|---|
| 1 - Residential Bathrooms |
| 2 - All Residential Areas |
| 3 - All Residential / Light Commercial |
| 4 - All Residential / Commercial |
Available Trim (3)
You May Also Like
