The natural elements of Raine™ are displayed throughout this beautiful assortment. With white and grey tones in a variety of tile sizes and mosaics, this natural marble collection embodies exquisite designs where no two pieces are the same.
Roll over image to zoom
:
M017
:
3/8
:
12X24
:
Polished
:
R: Random
:
Greece
:
M017
:
3/8
:
12X24, 3X9
:
Honed
:
R: Random
:
Greece
:
M017
:
3/8
:
2
:
Honed
:
H: High
:
China
:
M017
:
3/8
:
Irregular Shape
:
Tumbled
:
R: Random
:
China
-
Usage Chart
Grout Joint Recommendation 1/16", 1/8", AS NEEDED Durability 3 Heavy Commercial: Suitable for most commercial and/or high traffic areas. Soundness Group B: Similar to Group A but geological imperfections could be evident. These stones may contain holes or voids which are filled with epoxy or resin. Exterior Usage NA Not recommended for exterior applications. Country of Manufacturer Greece Country of Origin Greece Polished surfaces are not recommended for floor areas where slip resistance is a concern. Our durability recommendations are only based on the technical characteristics of the stones, however, slip resistance shall still be taken into consideration when selecting the product for a specific application. Natural stone products do not meet minimum coefficient of friction thresholds recommended by safety standard setting organizations. Soundness is meant to help classify denser stones (Group A and B) from more fragile stones (Group C and D). Stones classified under Groups C and D may require additional fabrication before, during or after installation as part of regular maintenance. A sealer is recommended. (Note: Some stones, such as limestone and tumbled stone among others, should be sealed prior to grouting.)|Can be used in interior wet wall areas, if sealed and maintained properly. If not properly maintained, the stone look could be altered. Please contact your sealer manufacturer or your Daltile sales representative for information about products that can protect the stone from moisture exposure.|Might contain dry seams, pits, fossils and glass veins that are filled at the factory or during installation. These are all inherent characteristics of the stone. Since these voids can sometimes lose their fillings, they should be refilled as part of normal maintenance.|White setting materials are recommended.