Marble has been used to create some of architecture and design's most impressive structures. This collective of earthy and neutral colors will add luxury and sophistication to any design.
Roll over image to zoom
-
Additional Colors
:
M753
:
3/8
:
6
:
Polished
:
M: Medium
:
China
-
Usage Chart
Grout Joint Recommendation 1/8" Durability 2 Medium/Light Commercial: Suitable for light commercial and residential use. Soundness Group A: Sound stones with no geological voids or fissures. These stones do not require any filling or patching. Exterior Usage E Suitable for uncovered exterior floor and wall applications in freezing and non-freezing climates. Country of Manufacturer China Country of Origin Italy Polished surfaces are not recommended for floor areas where slip resistance is a concern. Our durability recommendations are only based on the technical characteristics of the stones, however, slip resistance shall still be taken into consideration when selecting the product for a specific application. Natural stone products do not meet minimum coefficient of friction thresholds recommended by safety standard setting organizations. Soundness is meant to help classify denser stones (Group A and B) from more fragile stones (Group C and D). Stones classified under Groups C and D may require additional fabrication before, during or after installation as part of regular maintenance. A sealer is recommended. (Note: Some stones, such as limestone and tumbled stone among others, should be sealed prior to grouting.)|Can be used in interior wet wall areas, if sealed and maintained properly. If not properly maintained, the stone look could be altered. Please contact your sealer manufacturer or your Daltile sales representative for information about products that can protect the stone from moisture exposure.|Might contain dry seams, pits, fossils and glass veins that are filled at the factory or during installation. These are all inherent characteristics of the stone. Since these voids can sometimes lose their fillings, they should be refilled as part of normal maintenance.|Not recommended for shower floors.|The slip resistance of natural stone tiles vary. Caution should be used in determining if the selected stone will be sufficiently slip resistant for exterior use.|These stones contain deposits of minerals and iron that may react to moisture. Stone bleeding or rusting is a common example of this. These stones should not be used in installations where they would be exposed to standing, run off water or too much humidity. A sealer is strongly recommended but will not prevent the chemical reaction from happening|White setting materials are recommended.
You May Also Like
