Countertop | Floor | Wall
Matterhorn
Part of: Natural Stone Natural Stone Limestone Natural Stone Marble Natural Stone Travertine
Parksville Stone
Inspired by natural landmarks, Parksville Stone™ provides a full line up of products in natural marble, limestone, and travertine. Available in classic tile sizes including 3 x 6 and a 2 x 2 mosaic. Unique coordinating mosaics and trim also available.
Roll over image to zoom
-
Additional Colors
-
Usage Chart
Grout Joint Recommendation 1/8" Durability 3 Heavy Commercial: Suitable for most commercial and/or high traffic areas. Soundness Group A: Sound stones with no geological voids or fissures. These stones do not require any filling or patching. Exterior Usage SF Suitable for covered* exterior floors in non-freezing climates only.|SW Suitable for covered* exterior walls in non-freezing climates only. Country of Manufacturer Portugal Country of Origin Portugal Polished surfaces are not recommended for floor areas where slip resistance is a concern. Our durability recommendations are only based on the technical characteristics of the stones, however, slip resistance shall still be taken into consideration when selecting the product for a specific application. Natural stone products do not meet minimum coefficient of friction thresholds recommended by safety standard setting organizations. Soundness is meant to help classify denser stones (Group A and B) from more fragile stones (Group C and D). Stones classified under Groups C and D may require additional fabrication before, during or after installation as part of regular maintenance. *Covered implies an area protected from the elements. Natural stone products are not recommended for any wet areas where they may be exposed to chemicals, such as waterlines and pools, or to extreme humidity and heat, such as steam rooms, among others. A sealer is recommended. (Note: Some stones, such as limestone and tumbled stone among others, should be sealed prior to grouting.)|Can be used in interior wet wall areas, if sealed and maintained properly. If not properly maintained, the stone look could be altered. Please contact your sealer manufacturer or your Daltile sales representative for information about products that can protect the stone from moisture exposure.|Might contain dry seams, pits, fossils and glass veins that are filled at the factory or during installation. These are all inherent characteristics of the stone. Since these voids can sometimes lose their fillings, they should be refilled as part of normal maintenance.|Refer to the "Special Limestone Installation Guide"
You May Also Like