Floor | Wall

Calacatta Dolomiti

Part of: Natural Stone Natural Stone Marble

Pietra Divina

Pietra Divina™ sets a heavenly standard for natural stone. Three exquisite marbles feature a color palette that includes white with grey veining, white with warm gold movement, and a marvelous black with delicate white accents.

Go To Usage Chart>

Want to see this product in person? Where to buy

Roll over image to zoom

Additional Colors

Calacatta Dolomiti Rectangle

Color Code: M079

Thickness: 3/8

Size: 12X24

Finish: Polished

Shade Variation: H: High

Country of Origin: China

Calacatta Dolomiti Rectangle

Color Code: M079

Thickness: 3/8

Size: 12X24, 4X12

Finish: Honed

Shade Variation: H: High

Country of Origin: China

Calacatta Dolomiti Triangle

Color Code: M079

Thickness: 3/8

Size: 2

Finish: Mixed

Shade Variation: H: High

Country of Origin: China

Calacatta Dolomiti Bamboo

Color Code: M079

Thickness: 3/8

Size: 6X12

Finish: Honed

Shade Variation: H: High

Country of Origin: China

Calacatta Dolomiti Chevron

Color Code: M079

Thickness: 3/8

Size: Chevron

Finish: Polished

Shade Variation: H: High

Country of Origin: China

Calacatta Dolomiti Cupola

Color Code: M079

Thickness: 3/8

Size: Cupola

Finish: Mixed

Shade Variation: H: High

Country of Origin: China

Calacatta Dolomiti Framework

Color Code: M079

Thickness: 3/8

Size: Framework

Finish: Honed

Shade Variation: H: High

Country of Origin: China

Usage Chart


Grout Joint Recommendation	1/16", 1/8"
Durability	2 Medium/Light Commercial: Suitable for light commercial and residential use.
Soundness	Group A: Sound stones with no geological voids or fissures. These stones do not require any filling or patching.
Exterior Usage	SF Suitable for covered* exterior floors in non-freezing climates only.\|SW Suitable for covered* exterior walls in non-freezing climates only.
Country of Manufacturer	China
Country of Origin	Turkey
Durability Notes:Polished surfaces are not recommended for floor areas where slip resistance is a concern. Our durability recommendations are only based on the technical characteristics of the stones, however, slip resistance shall still be taken into consideration when selecting the product for a specific application. Natural stone products do not meet minimum coefficient of friction thresholds recommended by safety standard setting organizations.
Soundness Notes:Soundness is meant to help classify denser stones (Group A and B) from more fragile stones (Group C and D). Stones classified under Groups C and D may require additional fabrication before, during or after installation as part of regular maintenance.
Exterior Usage Notes:*Covered implies an area protected from the elements. Natural stone products are not recommended for any wet areas where they may be exposed to chemicals, such as waterlines and pools, or to extreme humidity and heat, such as steam rooms, among others.
Special Notes:A medium bed mortar is required for tiles with at least one side greater than 15".\|A sealer is recommended. (Note: Some stones, such as limestone and tumbled stone among others, should be sealed prior to grouting.)\|Can be used in interior wet wall areas, if sealed and maintained properly. If not properly maintained, the stone look could be altered. Please contact your sealer manufacturer or your Daltile sales representative for information about products that can protect the stone from moisture exposure.\|Not recommended for shower floors.\|The slip resistance of natural stone tiles vary. Caution should be used in determining if the selected stone will be sufficiently slip resistant for exterior use.\|These stones contain deposits of minerals and iron that may react to moisture. Stone bleeding or rusting is a common example of this. These stones should not be used in installations where they would be exposed to standing, run off water or too much humidity. A sealer is strongly recommended but will not prevent the chemical reaction from happening\|White setting materials are recommended.