Super Savings! Up to $500 off your tile purchase! Get Your Coupon Today ×

Ceramic Tile Installation Is Easier Than You Think

Installing ceramic tile is actually easier than you think and doing the work yourself can open up additional design possibilities. If you take it one step at a time, you can create an amazing new space that reflects your personal taste in a matter of days. So, if you're considering taking on a ceramic tile installation by yourself, follow this helpful advice.

Start Off with the Right Base

Tile should usually be installed on water-resistant backer board and not on top of drywall or old tile. The floor and walls should be clean, level, and smooth. Replace any pieces of wall or flooring as necessary, and then measure your space in every direction. Be sure to measure from the center of the floor or wall outward or choose a baseline wall.

When you start from a single point for all your measurements, installing your ceramic tile is easy—even if you're using tiles in odd or varying sizes. In fact, most tile can be installed in many patterns, allowing you to create your own custom designs.

Do a Dry Run

Lay the tiles out to get an idea of how you want to install them. Use chalk lines or tape to create a tile grid, if needed, so you know exactly where the tiles will go. If you're not sure which tile material to go with, keep in mind that it's easy to get creative with ceramic tile. Ceramic is versatile and easy to place.

Mix Mortar and Place Tiles

Follow the instructions to mix the mortar properly. When ready, spread the mortar evenly with a trowel. Firmly press each tile into place on top of the mortar, working with one small area at a time. Use spacers, if needed, for the grout lines you'll add later. Work with a level to lay the tiles evenly. Once your mortar has hardened for at least 24 hours, you may add the grout.

Grouting and Finishing the Tiles

Once the mortar is set, take the spacers out of your tile and mix the grout. Use a grout tool to spread and apply grout between the tiles. Remove any excess grout using the tool and a damp sponge. Then mist the grout with water three times a day for the next two days. Finally, apply a sealer to keep the grout looking clean. Keep in mind that large tiles require fewer grout lines, which creates a streamlined look and helps to show off the beauty of the tile itself.

Change Your Home with Ceramic Tile Installation

Ceramic tile can be manufactured to look like wood, stone, metal, and even glass. Once you get more confident with installing tile, you can play with many designs and tile accents to meet your own personal style. Get creative and consider adding scrolls, corner accents, and other embellishments as a touch of luxury to your design. For example, La Marque ceramic floor and wall accent tile comes in all sorts of designs and colors, so consider adding it to your design.

When choosing tile, you should also consider Natural Hues ceramic floor and wall tiles, which come in a variety of colors, ranging from soft pastels to dazzling jewel tones. On the other hand, Emblem floor and wall tile looks more like wood than ceramic. It's styled in rich, natural colors with distinctive textures that look like grain patterns. The ceramic composition also makes this tile resistant to moisture and extremely long-lasting.

By installing new ceramic tile on your floors and walls, you can give your home a brand-new look and style. By using these tips, and installing the tile yourself, not only will you be able to avoid having to hire and pay a professional, but you'll be able to personalize the design or pattern to your taste.

Back to All Articles