Field Tile CALIFORNIA GOLD Natural Cleft

Product Description

SlimLite™ Slate and Quartzite are revolutionary new surfacing products created by splitting raw material from actual slate and quartzite quarries.

Origin: India
Durability Floor: N/A - not recommended for floor use
Soundness: Group C - These stones may contain holes, voids, lines of separation and structural flaws. It is standard practice to repair these stones by filling them or reinforcing them
Shade Variation Random: Variegated in color and veining
Exterior Usage: EW - Suitable for covered* exterior walls in freezing and non-freezing climates

Commercial Exterior Usage: EW - Suitable for covered* exterior walls in freezing and non-freezing climates
Cut-To-Size Available: No
Alternate Finishes Available By Special Order: N/A

*Covered implies an area protected from the elements.

Size & Physical Details

Performance Characteristics

Notes

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, including crystalline Silica (airborne particles of respirable size) in dust created if the product is dry cut/ground/polished or pulverized during fabrication/installation/removal. For more information, go to www.P65Warnings.ca.gov.

	Not recommended in wet areas
	A sealer is recommended. (Note: Some stones, such as limestone and tumbled stone among others, should be sealed prior to grouting.)
	These stones contain deposits of minerals and iron that may react to moisture. Stone bleeding or rusting is a common example of this. These stones should not be used in installations where they would be exposed to standing, run off water or too much humidity. A sealer is strongly recommended but will not prevent the chemical reaction from happening. Please contact your sealer manufacturer for information about products that can protect the stone from moisture exposure
	White setting materials are recommended
	Not recommended for shower floors

Consult your Daltile Architectural Representative for more information on special sizes. Some finishes may require extended lead times.