SUPER SAVINGS! Up to $500 Off! Get Your Coupon Today ×
Textured porcelain tile on floor

Caring for and Maintaining Panoramic Porcelain Surfaces™

Read below for helpful, step-by-step instructions on how to best care for Daltile Textured Porcelain.

Porcelain tile mosaic on backsplash

Routine Care

Fully polished impervious porcelain tile is achieved by mechanically changing the surface from matte I natural to a honed or high-polished finish. Polished Colorbody© porcelain is achieved by mechanically changing the glaze surface from matte to light, honed or high-polish finish. This process creates a microporosity on the face of the tile. The tile itself is still technically sound porcelain with the same characteristics expected of high-quality impervious tile.

The surface, however, may possibly require added protection to assure clean-ability and ease of ongoing maintenance under a range of conditions, including but not limited to:

  • Grout haze removal
  • Construction chemicals and dirt
  • Maintenance I solvent based cleaning materials
  • Exposure to rubber containing solvent-based materials
  • Acid-based materials
All of the above can result in hazing, spotting, etching or general staining of the polished tile surface.

We recommend the use of a sealer on fully polished, impervious porcelain and polished glaze porcelain tile prior to grouting. We strongly caution against the use of acid-based or solvent-based chemicals for cleaning or construction maintenance on fully polished impervious or polished glaze porcelain tile. The use of such products may damage the floor.

Recommended Sealers Pre-Grout sold through Daltile stores may include:
  • DuPont Stone Tech Professional Bullet Proof (follow manufacturer instructions for application process)
  • Aqua Mix Ultra-Solv (follow manufacturer instructions for application process)
Recommended Sealers Post-Grout sold through Daltile stores may include:
  • DuPont Stone Tech Professional Impregnator Pro (follow manufacturer instructions for application process)
  • Aqua Mix Sealers Choice Gold (follow manufacturer instructions for application process)
IMPORTANT: Always use the same sealer when applying both before and after grouting. Never mix water-based sealers with solvent-based sealers on the same tiles.

With proper installation techniques, preventive care and effective maintenance procedures, fully polished impervious porcelain and polished glaze porcelain tile is a durable, high-value, long-lasting flooring option for most commercial and residential spaces.




Polished porcelian tile on floor

Stain Treatment

Recommended Stain Remover sold through Daltile stores may include:

  • DuPont Stone Tech KlenzAll (follow manufacturer instructions for application process)
  • Aqua Mix Sealer and Coating Remover (follow manufacturer instructions for application process)

Polished tile can be slippery when wet. Please refer to our usage and maintenance recommendation on our website and catalog for all porcelain products. www.daltile.com

Disclaimer

Daltile does not manufacture installation products or tile cleaning/maintenance products. Daltile provides the information contained herein to its customers as an information source only. The products identified in this website may have chemicals that cause reactions in certain individuals. Daltile strongly recommends the use of safety glasses, respirators (masks) and gloves in handling any materials that contain chemicals.

Daltile, in keeping with its Healthy Planet objectives, recommends the proper disposal of any scrap tile/stone, installation and/or maintenance products discussed herein.

Please contact the manufacturer directly, PRIOR to usage, to obtain proper handling instructions, application instructions and warnings concerning potential health hazards for any product contemplated for use. Daltile also strongly recommends that you ALWAYS test a small area PRIOR to usage of any installation/tile/cleaning/maintenance product to determine whether the product you are about to apply serves its intended purpose.

Natural stone has its own unique qualities that not only distinguish it from man-made materials, but also should be considered in selecting it for a particular project. Stone is not manufactured; it is a product of nature. Blocks are removed from the quarry, slabs are cut from these blocks, and the slabs are further fabricated into the final stone to be installed. Each block is different; each slab is different. Skillful blending or matching of the dimension stone blocks, veneer panels, tops, etc., results in a beautiful blending of nature’s variety and man’s design. “Uniformity of material,” when applied to natural stone, is a term of relative value that needs to be understood when making a selection.

To ensure your Natural Stone products will provide you with a lifetime of aesthetics and utility, proper maintenance is crucial. Natural Stone products are porous by nature and require a different maintenance program than traditional ceramic tile.





Slate tile floor

Discover our incredible breadth of products in the latest, most comprehensive Daltile catalog.

Daltile gallery

Learn how to choose the best tile for your next project with a little help from our expert designers.

Tile flooring

Experience the ease of tile installation with helpful tips to guide you through each process.